Archive for the ‘How to Pivot a Dart’ Category

Pattern Making E-book Sales

Posted on August 24th, 2011 by by admin

Welcome to pattern-making.com  On the blog you can share your project, tutorials tips, and general interest features about the crafting world. Upload photos of your finished projects Show off Your proud moment to the pattern making and craft Community and get a link back to your blog for free. Click here to add your project. PATTERN MAKING E-BOOKS [...]

How To Lengthen And Shorten A Dart

Posted on April 6th, 2009 by by admin

1. Measure directly up from the dart point the amount you wish to lengthen the dart. Mark the new dart point. 2. Draw new dart legs starting at the ends of the original darts and ending at the raised dart point The broken lines in diagram shown represent the original darts; the solid lines, the [...]

Shifting Dart

Posted on March 26th, 2009 by by admin

HOW TO SHIFT THE DART CONTROL FOR GATHERS, SHIRRING, OR SMOCKING Waistline Fullness (Fig. 24) 1.On the cut-out bodice-front sloper with the cut-out dart, locate the outside limits of the waistline fullness. Mark the points A and B (Fig. 24a). 2 Draw slash lines from A and B to the dart point. Draw several additional [...]

How to Shift Sleeve and Skirt Dart

Posted on March 26th, 2009 by by admin

How to Shift The Skirt Dart 1.Trace the skirt-front sloper. 2. Cut out the tracing and the dart. (Cut a batch of these slopers for future exercises so you won’t have to stop each time.) 3. Locate the position of the new dart at the waistline either at center front or at the side . [...]

How to Shift Sloper Dart to New Positions

Posted on March 26th, 2009 by by admin

The French underarm dart is a favorite for Manny reasons. The direction of the dart line suggests the lift one associates with a high youthful figure 1.Trace the bodice-front sloper. 2. Cut out the tracing and the dart. (You may want to make a batch of these cut-out bodices to keep handy for the following [...]

How to Pivot a Dart

Posted on July 28th, 2008 by by admin

Pivot Pivot to neckline dart on the double 1.to create two darts from old dart, mark two new locations as desired. trace from old dart to first new dart. 2.pin apex. pivot one-half of the old dart closed. trace from the first new dart to the second new dart location. 3.pivot old dart completely closed. [...]