Category Archives: Drafting Sleeve Patterns

Drafting Wing Sleeve

Deep Aarmhole Sleeves style 2 STYLES [WING SLEEVE DESIGNS] STYLE 1 This style features a 3-1/2” deeper armhole sleeve. Front has diagonal side dart. 1) Draft deeper armhole and wider shoulder as indicated. Draft side dart line; then mark sections
READ MORE

Drafting Topper Sleeve

2 STYLES [Sub-teens & Teens] DRAFT OF SLEEVE PATTERN [STYLE 1] Sketch at extreme left, illustrates the 2-piece topper set-in sleeve with a 4” wide turn-up cuff. Sleeve is 3/4 length. In order to draft; the deep armhole sleeve as
READ MORE

Sleeve Drafting

3 STYLES Illustration shows sleeve with great amount of fullness at top, but fitted from elbow to wrist. 1) Use the 1-piece shaped sleeve pattern as a guide, and mark a line down 4” long from the shoulder notch. 2)
READ MORE

Sleeve Drafting

STYLE 1   Illustration shows shoulder extended about 1-1/4” beyond the regular armhole. 1) Use the dress foundation of the front, back and sleeve as a guide. Cut off part of sleeve cap and apply to armhole at front and
READ MORE

Drafting Sleeve with Yolk

Yoke and Sleeve in One Illustrated shows shoulder extended about 1” beyond the regular armhole. The pad holds shoulder of yoke in position. The sleeve is in two parts with seam through center.1) Trace the dress foundation of the front,
READ MORE

Drafting Kimono Sleeve

Kimono Sleeve with Gusset DRAFT OF KIMONO SLEEVE STYLE KIMONO SLEEVE STYLE FEATURING – The 2-piece sleeve combined with front and back, and having the sleeve on the bias. A GUSSET is a diamond-shaped wedge [cut in 1 or 2
READ MORE

Drafting Raglan Sleeve

Raglan Sleeve with Dress Bodice HOW TO DRAFT PATTERN HOW TO DRAFT PATTERN The drafts on this page were developed by using the Junior Petite [Size 7] or the team’s [Size 12] Dress Bodice Foundation. Dress Bodice 1) Trace Dress
READ MORE

Drafting The Push up Sleeve

Draft The Push up Sleeve STYLE   Sleeve is in two sections, and is called the ‘Jack-O-Lantern’ sleeve. The pattern is so cut that the upper and lower sleeve sections are circular, thus eliminating the underarm seam. 1) Trace the
READ MORE

Drafting the Push up Sleeve

2 STYLES-STYLE 3 Sketch shows 3/4 length sleeve with cuff pushed up toward the elbow. Sleeve has allowance for gathers to make it puff around the arm. In addition, the sleeve has an extra allowance for an inverted pleat in
READ MORE

Sleeve Drafting

3 STYLES Illustration shows 2-piece shaped sleeve. 1: Trace sleeve draft according to the outline of the draft on the sleeve foundation : then shape sleeve below elbow, 2: Draw the under sleeve seam lines within the sleeve as illustrated. 3:
READ MORE